[ 0.000000] Linux version 2.6.35-rc5-autokern1 (root@btrfs1.austin.ibm.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Sun Jul 18 16:03:32 CDT 2010 [ 0.000000] Command line: ro root=/dev/VolGroup00/LogVol00 mem=5G nopmtimer [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff8dac0 (usable) [ 0.000000] BIOS-e820: 00000000bff8dac0 - 00000000bff98880 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff98880 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000840000000 (usable) [ 0.000000] e820 remove range: 0000000140000000 - ffffffffffffffff (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] user-defined physical RAM map: [ 0.000000] user: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] user: 0000000000099000 - 00000000000a0000 (reserved) [ 0.000000] user: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] user: 0000000000100000 - 00000000bff8dac0 (usable) [ 0.000000] user: 00000000bff8dac0 - 00000000bff98880 (ACPI data) [ 0.000000] user: 00000000bff98880 - 00000000c0000000 (reserved) [ 0.000000] user: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] user: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 0100000000 mask FF00000000 write-back [ 0.000000] 3 base 0200000000 mask FE00000000 write-back [ 0.000000] 4 base 0400000000 mask FC00000000 write-back [ 0.000000] 5 base 0800000000 mask F800000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff8d max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff880000099140] 99140 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff8d000 [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff8d000 page 4k [ 0.000000] kernel direct mapping tables up to bff8d000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 37c86000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fdcf0 00014 (v00 IBM ) [ 0.000000] ACPI: RSDT 00000000bff98800 00034 (v01 IBM EXA01ZEU 00001000 IBM 45444F43) [ 0.000000] ACPI: FACP 00000000bff98780 00074 (v01 IBM EXA01ZEU 00001000 IBM 45444F43) [ 0.000000] ACPI: DSDT 00000000bff8dac0 02D9A (v01 IBM EXA01ZEU 00001000 INTL 20030122) [ 0.000000] ACPI: FACS 00000000bff98440 00040 [ 0.000000] ACPI: APIC 00000000bff98600 00142 (v01 IBM EXA01ZEU 00001000 IBM 45444F43) [ 0.000000] ACPI: SRAT 00000000bff98480 00180 (v01 IBM EXA01ZEU 00001000 IBM 45444F43) [ 0.000000] ACPI: SSDT 00000000bff90880 07BBC (v01 IBM VIGSSDT0 00001000 INTL 20030122) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IBM Summit detected, will use apic physical [ 0.000000] Setting APIC routing to physical flat. [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x26 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x27 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x24 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x25 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x12 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x13 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x36 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x37 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x34 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x35 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-840000000 [ 0.000000] SRAT: Node 0 [0,c0000000) + [100000000,840000000) -> [0,840000000) [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Initmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880100200000-ffff8801039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000099 [ 0.000000] 0: 0x00000100 -> 0x000bff8d [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048357 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3936 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767941 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x9c [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IBM Summit detected, will use apic physical [ 0.000000] Setting APIC routing to physical flat. [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x26] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x27] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x25] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x36] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x37] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 15, version 17, address 0xfec00000, GSI 0-35 [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36]) [ 0.000000] IOAPIC[1]: apic_id 14, version 17, address 0xfec01000, GSI 36-71 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ8 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 88 [ 0.000000] early_res array is doubled to 64 at [7000 - 77ff] [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] setup_percpu: NR_CPUS:255 nr_cpumask_bits:255 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001e00000 s82304 r8192 d24192 u131072 [ 0.000000] early_res array is doubled to 128 at [c000 - cfff] [ 0.000000] pcpu-alloc: s82304 r8192 d24192 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030437 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 mem=5G nopmtimer [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Subtract (63 early reservations) [ 0.000000] #1 [0001000000 - 0001d5fe10] TEXT DATA BSS [ 0.000000] #2 [0037c86000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d60000 - 0001d6018c] BRK [ 0.000000] #4 [0000099000 - 0000099140] BIOS reserved [ 0.000000] #5 [0000099140 - 0000099150] MP-table mpf [ 0.000000] #6 [0000099150 - 000009a8a0] BIOS reserved [ 0.000000] #7 [000009ab44 - 0000100000] BIOS reserved [ 0.000000] #8 [000009a8a0 - 000009ab44] MP-table mpc [ 0.000000] #9 [0000001000 - 0000003000] TRAMPOLINE [ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP [ 0.000000] #11 [0000008000 - 000000b000] PGTABLE [ 0.000000] #12 [000000b000 - 000000c000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d601c0 - 0001d611c0] BOOTMEM [ 0.000000] #15 [00021611c0 - 00021614c0] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103a00000] MEMMAP 0 [ 0.000000] #19 [0001d611c0 - 0001d791c0] BOOTMEM [ 0.000000] #20 [0001d791c0 - 0001d911c0] BOOTMEM [ 0.000000] #21 [0001d911c0 - 0001da91c0] BOOTMEM [ 0.000000] #22 [0001daa000 - 0001dab000] BOOTMEM [ 0.000000] #23 [0001d5fe40 - 0001d5fec6] BOOTMEM [ 0.000000] #24 [0001da91c0 - 0001da93b8] BOOTMEM [ 0.000000] #25 [0001d5ff00 - 0001d5ff68] BOOTMEM [ 0.000000] #26 [0001d5ff80 - 0001d5ffe8] BOOTMEM [ 0.000000] #27 [0001da93c0 - 0001da9428] BOOTMEM [ 0.000000] #28 [0001da9440 - 0001da94a8] BOOTMEM [ 0.000000] #29 [0001da94c0 - 0001da9528] BOOTMEM [ 0.000000] #30 [0001da9540 - 0001da95a8] BOOTMEM [ 0.000000] #31 [0001da95c0 - 0001da9628] BOOTMEM [ 0.000000] #32 [0001da9640 - 0001da96a8] BOOTMEM [ 0.000000] #33 [0001da96c0 - 0001da96f2] BOOTMEM [ 0.000000] #34 [0001da9700 - 0001da9732] BOOTMEM [ 0.000000] #35 [0001e00000 - 0001e1c000] BOOTMEM [ 0.000000] #36 [0001e20000 - 0001e3c000] BOOTMEM [ 0.000000] #37 [0001e40000 - 0001e5c000] BOOTMEM [ 0.000000] #38 [0001e60000 - 0001e7c000] BOOTMEM [ 0.000000] #39 [0001e80000 - 0001e9c000] BOOTMEM [ 0.000000] #40 [0001ea0000 - 0001ebc000] BOOTMEM [ 0.000000] #41 [0001ec0000 - 0001edc000] BOOTMEM [ 0.000000] #42 [0001ee0000 - 0001efc000] BOOTMEM [ 0.000000] #43 [0001f00000 - 0001f1c000] BOOTMEM [ 0.000000] #44 [0001f20000 - 0001f3c000] BOOTMEM [ 0.000000] #45 [0001f40000 - 0001f5c000] BOOTMEM [ 0.000000] #46 [0001f60000 - 0001f7c000] BOOTMEM [ 0.000000] #47 [0001f80000 - 0001f9c000] BOOTMEM [ 0.000000] #48 [0001fa0000 - 0001fbc000] BOOTMEM [ 0.000000] #49 [0001fc0000 - 0001fdc000] BOOTMEM [ 0.000000] #50 [0001fe0000 - 0001ffc000] BOOTMEM [ 0.000000] #51 [0001da9740 - 0001da9748] BOOTMEM [ 0.000000] #52 [0001da9780 - 0001da9788] BOOTMEM [ 0.000000] #53 [0001da97c0 - 0001da9800] BOOTMEM [ 0.000000] #54 [0001da9800 - 0001da9880] BOOTMEM [ 0.000000] #55 [0001da9880 - 0001da9990] BOOTMEM [ 0.000000] #56 [0001da99c0 - 0001da9a08] BOOTMEM [ 0.000000] #57 [0001da9a40 - 0001da9a88] BOOTMEM [ 0.000000] #58 [0001dab000 - 0001db3000] BOOTMEM [ 0.000000] #59 [0002162000 - 0006162000] BOOTMEM [ 0.000000] #60 [0001db3000 - 0001dd3000] BOOTMEM [ 0.000000] #61 [0001ffc000 - 000203c000] BOOTMEM [ 0.000000] #62 [000000d000 - 0000015000] BOOTMEM [ 0.000000] Memory: 4050744k/5242880k available (3195k kernel code, 1049452k absent, 142684k reserved, 4564k data, 472k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3002.771 MHz processor. [ 0.002013] Calibrating delay loop (skipped), value calculated using timer frequency.. 6005.54 BogoMIPS (lpj=3002771) [ 0.003004] pid_max: default: 32768 minimum: 301 [ 0.003499] Security Framework initialized [ 0.004008] SELinux: Initializing. [ 0.004422] SELinux: Starting in permissive mode [ 0.005237] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009128] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010990] Mount-cache hash table entries: 256 [ 0.011291] CPU: Physical Processor ID: 0 [ 0.012004] CPU: Processor Core ID: 0 [ 0.012395] mce: CPU supports 4 MCE banks [ 0.012797] CPU0: Thermal monitoring enabled (TM1) [ 0.013006] using mwait in idle threads. [ 0.013397] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.014006] ... version: 0 [ 0.014395] ... bit width: 40 [ 0.015003] ... generic registers: 18 [ 0.015393] ... value mask: 000000ffffffffff [ 0.015791] ... max period: 0000007fffffffff [ 0.016003] ... fixed-purpose events: 0 [ 0.016393] ... event mask: 000000000003ffff [ 0.017032] ACPI: Core revision 20100428 [ 0.042106] Setting APIC routing to physical flat [ 0.044697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.044999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.044999] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.044999] ..... (found apic 0 pin 2) ... [ 0.044999] ....... failed. [ 0.044999] ...trying to set up timer as Virtual Wire IRQ... [ 0.055223] ..... works. [ 0.055605] CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 08 [ 0.157999] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 Ok. [ 1.243024] Brought up 16 CPUs [ 1.243413] Total of 16 processors activated (96063.68 BogoMIPS). [ 1.249849] NET: Registered protocol family 16 [ 1.250568] ACPI: bus type pci registered [ 1.251181] PCI: Using configuration type 1 for base access [ 1.251589] PCI: IBM System x3950 detected, can skip ISA alignment [ 1.259680] bio: create slab at 0 [ 1.263131] ACPI: EC: Look up EC in DSDT [ 1.316061] ACPI: Interpreter enabled [ 1.316454] ACPI: (supports S0 S5) [ 1.316982] ACPI: Using IOAPIC for interrupt routing [ 1.338310] ACPI: No dock devices found. [ 1.338705] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 1.339068] ACPI: PCI Root Bridge [VP00] (domain 0000 [bus 00]) [ 1.340095] pci_root PNP0A03:00: host bridge window [mem 0xf8c00000-0xf8cfffff] (ignored) [ 1.340100] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xf7ffffff] (ignored) [ 1.340103] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.340107] pci_root PNP0A03:00: host bridge window [io 0x0000-0x1fff] (ignored) [ 1.340246] pci 0000:00:01.0: reg 10: [mem 0xf0000000-0xf7ffffff pref] [ 1.340256] pci 0000:00:01.0: reg 14: [io 0x1800-0x18ff] [ 1.340265] pci 0000:00:01.0: reg 18: [mem 0xf8c00000-0xf8c0ffff] [ 1.340292] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.340325] pci 0000:00:01.0: supports D1 D2 [ 1.340374] pci 0000:00:03.0: reg 10: [mem 0xf8c10000-0xf8c10fff] [ 1.340440] pci 0000:00:03.0: supports D1 D2 [ 1.340444] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot [ 1.340449] pci 0000:00:03.0: PME# disabled [ 1.340497] pci 0000:00:03.1: reg 10: [mem 0xf8c11000-0xf8c11fff] [ 1.340564] pci 0000:00:03.1: supports D1 D2 [ 1.340567] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot [ 1.340573] pci 0000:00:03.1: PME# disabled [ 1.340618] pci 0000:00:03.2: reg 10: [mem 0xf8c12000-0xf8c120ff] [ 1.340685] pci 0000:00:03.2: supports D1 D2 [ 1.340687] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot [ 1.340693] pci 0000:00:03.2: PME# disabled [ 1.340827] pci 0000:00:0f.1: reg 10: [io 0x01f0-0x01f7] [ 1.340836] pci 0000:00:0f.1: reg 14: [io 0x03f4-0x03f7] [ 1.340845] pci 0000:00:0f.1: reg 18: [io 0x0170-0x0177] [ 1.340853] pci 0000:00:0f.1: reg 1c: [io 0x0374-0x0377] [ 1.340862] pci 0000:00:0f.1: reg 20: [io 0x0700-0x070f] [ 1.341020] ACPI: PCI Interrupt Routing Table [\_SB_.VP00._PRT] [ 1.342082] ACPI: PCI Root Bridge [VP01] (domain 0000 [bus 01]) [ 1.342654] pci_root PNP0A03:01: host bridge window [mem 0xf8d00000-0xf8dfffff] (ignored) [ 1.342659] pci_root PNP0A03:01: host bridge window [mem 0xf8400000-0xf84fffff] (ignored) [ 1.342662] pci_root PNP0A03:01: host bridge window [io 0x2000-0x27ff] (ignored) [ 1.342792] pci 0000:01:01.0: reg 10: [mem 0xf8dc0000-0xf8dcffff 64bit] [ 1.342860] pci 0000:01:01.0: PME# supported from D3hot D3cold [ 1.342866] pci 0000:01:01.0: PME# disabled [ 1.342931] pci 0000:01:01.1: reg 10: [mem 0xf8dd0000-0xf8ddffff 64bit] [ 1.343004] pci 0000:01:01.1: PME# supported from D3hot D3cold [ 1.343010] pci 0000:01:01.1: PME# disabled [ 1.343085] pci 0000:01:02.0: reg 10: [mem 0xf8d80000-0xf8dbffff 64bit] [ 1.343100] pci 0000:01:02.0: reg 18: [mem 0xf8400000-0xf841ffff 64bit pref] [ 1.343108] pci 0000:01:02.0: reg 20: [io 0x2000-0x20ff] [ 1.343121] pci 0000:01:02.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 1.343230] ACPI: PCI Interrupt Routing Table [\_SB_.VP01._PRT] [ 1.343745] ACPI: PCI Root Bridge [VP02] (domain 0000 [bus 02-03]) [ 1.344245] pci_root PNP0A03:02: host bridge window [mem 0xf8800000-0xf8bfffff] (ignored) [ 1.344245] pci_root PNP0A03:02: host bridge window [mem 0xf8000000-0xf83fffff] (ignored) [ 1.344245] pci_root PNP0A03:02: host bridge window [io 0x3000-0x3fff] (ignored) [ 1.344317] ACPI: PCI Interrupt Routing Table [\_SB_.VP02._PRT] [ 1.345265] ACPI: PCI Root Bridge [VP03] (domain 0000 [bus 04-05]) [ 1.345837] pci_root PNP0A03:03: host bridge window [mem 0xf8e00000-0xf8efffff] (ignored) [ 1.345842] pci_root PNP0A03:03: host bridge window [io 0x2800-0x29ff] (ignored) [ 1.345965] pci 0000:04:01.0: reg 10: [io 0x2800-0x28ff] [ 1.345979] pci 0000:04:01.0: reg 14: [mem 0xf8e20000-0xf8e20fff 64bit] [ 1.346008] pci 0000:04:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.346110] ACPI: PCI Interrupt Routing Table [\_SB_.VP03._PRT] [ 1.347524] ACPI: PCI Root Bridge [VP04] (domain 0000 [bus 06-07]) [ 1.348160] pci_root PNP0A03:04: host bridge window [mem 0xf8f00000-0xf8ffffff] (ignored) [ 1.348165] pci_root PNP0A03:04: host bridge window [io 0x2a00-0x2bff] (ignored) [ 1.348272] pci 0000:06:01.0: reg 10: [mem 0xf8f20000-0xf8f20fff 64bit] [ 1.348286] pci 0000:06:01.0: reg 18: [mem 0xf8f21000-0xf8f210ff 64bit] [ 1.348294] pci 0000:06:01.0: reg 20: [io 0x2a00-0x2aff] [ 1.348307] pci 0000:06:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.348370] ACPI: PCI Interrupt Routing Table [\_SB_.VP04._PRT] [ 1.349773] ACPI: PCI Root Bridge [VP05] (domain 0000 [bus 08-09]) [ 1.350275] pci_root PNP0A03:05: host bridge window [mem 0xf9000000-0xf90fffff] (ignored) [ 1.350275] pci_root PNP0A03:05: host bridge window [io 0x2c00-0x2dff] (ignored) [ 1.350295] pci 0000:08:01.0: reg 10: [mem 0xf9020000-0xf9020fff 64bit] [ 1.350309] pci 0000:08:01.0: reg 18: [mem 0xf9021000-0xf90210ff 64bit] [ 1.350317] pci 0000:08:01.0: reg 20: [io 0x2c00-0x2cff] [ 1.350330] pci 0000:08:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.350394] ACPI: PCI Interrupt Routing Table [\_SB_.VP05._PRT] [ 1.351976] ACPI: PCI Root Bridge [VP06] (domain 0000 [bus 0a-0b]) [ 1.352471] pci_root PNP0A03:06: host bridge window [mem 0xf9100000-0xf91fffff] (ignored) [ 1.352471] pci_root PNP0A03:06: host bridge window [io 0x2e00-0x2fff] (ignored) [ 1.352471] pci 0000:0a:01.0: reg 10: [mem 0xf9120000-0xf9120fff 64bit] [ 1.352471] pci 0000:0a:01.0: reg 18: [mem 0xf9121000-0xf91210ff 64bit] [ 1.352471] pci 0000:0a:01.0: reg 20: [io 0x2e00-0x2eff] [ 1.352471] pci 0000:0a:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.352471] ACPI: PCI Interrupt Routing Table [\_SB_.VP06._PRT] [ 1.354185] ACPI: PCI Root Bridge [VP07] (domain 0000 [bus 0c-0d]) [ 1.354760] pci_root PNP0A03:07: host bridge window [mem 0xf9200000-0xf92fffff] (ignored) [ 1.354765] pci_root PNP0A03:07: host bridge window [io 0x4000-0x41ff] (ignored) [ 1.354870] pci 0000:0c:01.0: reg 10: [mem 0xf9220000-0xf9220fff 64bit] [ 1.354884] pci 0000:0c:01.0: reg 18: [mem 0xf9221000-0xf92210ff 64bit] [ 1.354892] pci 0000:0c:01.0: reg 20: [io 0x4000-0x40ff] [ 1.354905] pci 0000:0c:01.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.354970] ACPI: PCI Interrupt Routing Table [\_SB_.VP07._PRT] [ 1.356668] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 1.357023] vgaarb: loaded [ 1.358058] usbcore: registered new interface driver usbfs [ 1.358590] usbcore: registered new interface driver hub [ 1.359105] usbcore: registered new device driver usb [ 1.359865] PCI: Using ACPI for IRQ routing [ 1.360005] PCI: pci_cache_line_size set to 64 bytes [ 1.360146] reserve RAM buffer: 0000000000099000 - 000000000009ffff [ 1.360151] reserve RAM buffer: 00000000bff8dac0 - 00000000bfffffff [ 1.360678] NetLabel: Initializing [ 1.361004] NetLabel: domain hash size = 128 [ 1.361396] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.361818] NetLabel: unlabeled traffic allowed by default [ 1.362030] Switching to clocksource tsc [ 1.364861] pnp: PnP ACPI init [ 1.365266] ACPI: bus type pnp registered [ 1.367731] pnp 00:07: IRQ 8 override to edge, low [ 1.368750] pnp 00:0b: disabling [mem 0x00000400-0x000004ff] because it overlaps 0000:00:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.369514] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:01:02.0 BAR 6 [mem 0x00000000-0x0007ffff pref] [ 1.370271] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:04:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.371021] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:06:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.371778] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:08:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.372537] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:0a:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.373297] pnp 00:0b: disabling [mem 0x00000400-0x000004ff disabled] because it overlaps 0000:0c:01.0 BAR 6 [mem 0x00000000-0x0001ffff pref] [ 1.392881] pnp: PnP ACPI: found 20 devices [ 1.393282] ACPI: ACPI bus type pnp unregistered [ 1.393695] system 00:0a: [io 0x0400-0x047f] has been reserved [ 1.394099] system 00:0a: [io 0x0480-0x04ff] has been reserved [ 1.394508] system 00:0a: [io 0x0500-0x055f] has been reserved [ 1.394911] system 00:0a: [io 0x0600] has been reserved [ 1.395316] system 00:0a: [io 0x0800-0x0803] has been reserved [ 1.395718] system 00:0a: [io 0x0c00-0x0cdf] has been reserved [ 1.396122] system 00:0a: [io 0x0f50-0x0f5f] has been reserved [ 1.396539] system 00:0c: [mem 0x800000000-0x83fffffff window] has been reserved [ 1.397266] system 00:0c: [mem 0x780000000-0x7ffffffff window] has been reserved [ 1.397987] system 00:0c: [mem 0x700000000-0x77fffffff window] has been reserved [ 1.398715] system 00:0c: [mem 0x680000000-0x6ffffffff window] has been reserved [ 1.399439] system 00:0c: [mem 0x600000000-0x67fffffff window] has been reserved [ 1.400164] system 00:0c: [mem 0x580000000-0x5ffffffff window] has been reserved [ 1.400884] system 00:0c: [mem 0x500000000-0x57fffffff window] has been reserved [ 1.401609] system 00:0c: [mem 0x480000000-0x4ffffffff window] has been reserved [ 1.402335] system 00:0c: [mem 0x400000000-0x47fffffff window] has been reserved [ 1.403054] system 00:0c: [mem 0x380000000-0x3ffffffff window] has been reserved [ 1.403780] system 00:0c: [mem 0x300000000-0x37fffffff window] has been reserved [ 1.404505] system 00:0c: [mem 0x280000000-0x2ffffffff window] has been reserved [ 1.405231] system 00:0c: [mem 0x200000000-0x27fffffff window] has been reserved [ 1.405952] system 00:0c: [mem 0x180000000-0x1ffffffff window] has been reserved [ 1.406678] system 00:0c: [mem 0x100000000-0x17fffffff window] could not be reserved [ 1.407407] system 00:0c: [mem 0x00100000-0xbfffffff window] could not be reserved [ 1.409114] pci 0000:00:01.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref] [ 1.409843] pci 0000:01:02.0: BAR 6: assigned [mem 0xc0080000-0xc00fffff pref] [ 1.410568] pci 0000:04:01.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref] [ 1.411294] pci 0000:06:01.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref] [ 1.412012] pci 0000:08:01.0: BAR 6: assigned [mem 0xc0060000-0xc007ffff pref] [ 1.412739] pci 0000:0a:01.0: BAR 6: assigned [mem 0xc0100000-0xc011ffff pref] [ 1.413464] pci 0000:0c:01.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref] [ 1.414187] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.414191] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414195] pci_bus 0000:01: resource 0 [io 0x0000-0xffff] [ 1.414198] pci_bus 0000:01: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414202] pci_bus 0000:02: resource 0 [io 0x0000-0xffff] [ 1.414205] pci_bus 0000:02: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414209] pci_bus 0000:04: resource 0 [io 0x0000-0xffff] [ 1.414212] pci_bus 0000:04: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414216] pci_bus 0000:06: resource 0 [io 0x0000-0xffff] [ 1.414219] pci_bus 0000:06: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414223] pci_bus 0000:08: resource 0 [io 0x0000-0xffff] [ 1.414226] pci_bus 0000:08: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414229] pci_bus 0000:0a: resource 0 [io 0x0000-0xffff] [ 1.414233] pci_bus 0000:0a: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414236] pci_bus 0000:0c: resource 0 [io 0x0000-0xffff] [ 1.414239] pci_bus 0000:0c: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.414448] NET: Registered protocol family 2 [ 1.415195] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.418159] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.424717] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.425955] TCP: Hash tables configured (established 524288 bind 65536) [ 1.426366] TCP reno registered [ 1.426769] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.427240] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.428126] NET: Registered protocol family 1 [ 1.428550] pci 0000:00:01.0: Boot video device [ 1.428746] PCI: CLS 64 bytes, default 64 [ 1.428848] Trying to unpack rootfs image as initramfs... [ 1.537510] Freeing initrd memory: 3496k freed [ 1.540607] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.541020] Placing 64MB software IO TLB between ffff880002162000 - ffff880006162000 [ 1.541746] software IO TLB at phys 0x2162000 - 0x6162000 [ 1.550517] audit: initializing netlink socket (disabled) [ 1.550936] type=2000 audit(1279498012.549:1): initialized [ 1.579883] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.581276] VFS: Disk quotas dquot_6.5.2 [ 1.581752] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.591670] msgmni has been set to 7918 [ 1.592174] SELinux: Registering netfilter hooks [ 1.593113] alg: No test for stdrng (krng) [ 1.593525] io scheduler noop registered [ 1.593917] io scheduler deadline registered [ 1.594392] io scheduler cfq registered (default) [ 1.595199] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.599113] ACPI: acpi_idle registered with cpuidle [ 1.611839] Non-volatile memory driver v1.3 [ 1.612240] Linux agpgart interface v0.103 [ 1.612947] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.860678] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.106600] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.107611] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.108305] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.112448] brd: module loaded [ 2.112835] Uniform Multi-Platform E-IDE driver [ 2.113408] serverworks 0000:00:0f.1: IDE controller (0x1166:0x0213 rev 0xa0) [ 2.113859] serverworks 0000:00:0f.1: not 100% native mode: will probe irqs later [ 2.114589] ide0: BM-DMA at 0x0700-0x0707 [ 2.115004] serverworks 0000:00:0f.1: simplex device: DMA disabled [ 2.115407] ide1: DMA disabled [ 2.115793] Probing IDE interface ide0... [ 2.787130] hda: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, ATAPI CD/DVD-ROM drive [ 3.093729] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 3.094726] hda: UDMA/33 mode selected [ 3.095693] Probing IDE interface ide1... [ 3.608577] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 3.609079] ide1 at 0x170-0x177,0x376 on irq 15 [ 3.610764] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports [ 3.611575] ide-gd driver 1.18 [ 3.612478] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.615002] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.615414] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.615985] mice: PS/2 mouse device common for all mice [ 3.616640] cpuidle: using governor ladder [ 3.619049] usbcore: registered new interface driver hiddev [ 3.619538] usbcore: registered new interface driver usbhid [ 3.619939] usbhid: USB HID core driver [ 3.620836] TCP bic registered [ 3.621222] Initializing XFRM netlink socket [ 3.621633] NET: Registered protocol family 17 [ 3.622420] registered taskstats version 1 [ 3.623398] Freeing unused kernel memory: 472k freed [ 3.624153] Write protecting the kernel read-only data: 6144k [ 3.624796] Freeing unused kernel memory: 884k freed [ 3.625958] Freeing unused kernel memory: 328k freed [ 3.913758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.914228] ehci_hcd 0000:00:03.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 3.914712] ehci_hcd 0000:00:03.2: EHCI Host Controller [ 3.915253] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 [ 3.936393] ehci_hcd 0000:00:03.2: irq 20, io mem 0xf8c12000 [ 3.942362] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00 [ 3.942918] hub 1-0:1.0: USB hub found [ 3.943313] hub 1-0:1.0: 4 ports detected [ 3.947477] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.947931] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.948401] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 3.948911] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 3.949668] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf8c10000 [ 4.030524] hub 2-0:1.0: USB hub found [ 4.030921] hub 2-0:1.0: 2 ports detected [ 4.031451] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 4.031877] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 4.032328] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 4.033070] ohci_hcd 0000:00:03.1: irq 20, io mem 0xf8c11000 [ 4.114471] hub 3-0:1.0: USB hub found [ 4.114867] hub 3-0:1.0: 2 ports detected [ 4.119030] uhci_hcd: USB Universal Host Controller Interface driver [ 4.172029] SCSI subsystem initialized [ 4.212246] libata version 3.00 loaded. [ 4.227351] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 4.227933] aic94xx 0000:01:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25 [ 4.228422] aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:01:02.0 [ 4.229143] scsi0 : aic94xx [ 4.262291] aic94xx: Found sequencer Firmware version 1.1 (V30) [ 4.332805] aic94xx: device 0000:01:02.0: SAS addr 5005076a018d6780, PCBA SN , 8 phys, 8 enabled phys, flash present, BIOS build 1325 [ 4.338388] scsi 0:0:0:0: Direct-Access IBM-ESXS MAY2036RC T106 PQ: 0 ANSI: 5 [ 4.341740] sd 0:0:0:0: [sda] 71096640 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 4.344608] sd 0:0:0:0: [sda] Write Protect is off [ 4.345004] sd 0:0:0:0: [sda] Mode Sense: d7 00 00 08 [ 4.346195] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 4.351335] sda: sda1 sda2 [ 4.359839] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.428204] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 4.594680] input: IBM PPC I/F as /class/input/input0 [ 4.595136] generic-usb 0003:04B3:4001.0001: input: USB HID v1.10 Keyboard [IBM PPC I/F] on usb-0000:00:03.1-1/input0 [ 4.609413] input: IBM PPC I/F as /class/input/input1 [ 4.609880] generic-usb 0003:04B3:4001.0002: input: USB HID v1.10 Mouse [IBM PPC I/F] on usb-0000:00:03.1-1/input1 [ 5.353370] Emulex LightPulse Fibre Channel SCSI driver 8.3.12 [ 5.353775] Copyright(c) 2004-2009 Emulex. All rights reserved. [ 5.354280] lpfc 0000:06:01.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52 [ 5.356357] scsi1 : on PCI bus 06 device 08 irq 52 [ 11.944012] lpfc 0000:08:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53 [ 11.946262] scsi2 : on PCI bus 08 device 08 irq 53 [ 12.132727] lpfc 0000:06:01.0: 0:1303 Link Up Event x1 received Data: x1 x1 x8 x2 x0 x0 0 [ 12.135185] lpfc 0000:06:01.0: 0:(0):0100 FLOGI failure Status:x3/x18 TMO:x0 [ 12.175831] scsi 1:0:0:0: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 12.179371] scsi 1:0:0:1: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 12.180258] sd 1:0:0:0: [sdb] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 12.181073] sd 1:0:0:1: [sdc] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 12.181819] sd 1:0:0:0: [sdb] Write Protect is off [ 12.181941] sd 1:0:0:1: [sdc] Write Protect is off [ 12.181945] sd 1:0:0:1: [sdc] Mode Sense: 77 00 10 08 [ 12.182204] sd 1:0:0:1: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.183265] sdc: [ 12.183408] sd 1:0:0:0: [sdb] Mode Sense: 77 00 10 08 [ 12.183443] unknown partition table [ 12.184536] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 12.185908] sd 1:0:0:1: [sdc] Attached SCSI disk [ 12.186690] sdb: unknown partition table [ 12.188381] sd 1:0:0:0: [sdb] Attached SCSI disk [ 18.533931] lpfc 0000:0a:01.0: PCI INT A -> GSI 54 (level, low) -> IRQ 54 [ 18.536276] scsi3 : on PCI bus 0a device 08 irq 54 [ 18.722606] lpfc 0000:08:01.0: 1:1303 Link Up Event x1 received Data: x1 x1 x8 x2 x0 x0 0 [ 18.725052] lpfc 0000:08:01.0: 1:(0):0100 FLOGI failure Status:x3/x18 TMO:x0 [ 18.765957] scsi 2:0:0:0: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 18.769698] scsi 2:0:0:1: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 18.770573] sd 2:0:0:0: [sdd] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 18.771441] sd 2:0:0:0: [sdd] Write Protect is off [ 18.771860] sd 2:0:0:0: [sdd] Mode Sense: 77 00 10 08 [ 18.772010] sd 2:0:0:1: [sde] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 18.772869] sd 2:0:0:1: [sde] Write Protect is off [ 18.773283] sd 2:0:0:1: [sde] Mode Sense: 77 00 10 08 [ 18.773290] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 18.773522] sd 2:0:0:1: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 18.774710] sde: unknown partition table [ 18.776346] sdd: unknown partition table [ 18.777142] sd 2:0:0:1: [sde] Attached SCSI disk [ 18.778142] sd 2:0:0:0: [sdd] Attached SCSI disk [ 34.127194] lpfc 0000:0c:01.0: PCI INT A -> GSI 55 (level, low) -> IRQ 55 [ 34.129453] scsi4 : on PCI bus 0c device 08 irq 55 [ 34.146177] lpfc 0000:0a:01.0: 2:1303 Link Up Event x1 received Data: x1 x1 x8 x2 x0 x0 0 [ 34.148636] lpfc 0000:0a:01.0: 2:(0):0100 FLOGI failure Status:x3/x18 TMO:x0 [ 34.188992] scsi 3:0:0:0: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 34.192491] scsi 3:0:0:1: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 34.193366] sd 3:0:0:0: [sdf] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 34.194248] sd 3:0:0:0: [sdf] Write Protect is off [ 34.194663] sd 3:0:0:0: [sdf] Mode Sense: 77 00 10 08 [ 34.194668] sd 3:0:0:1: [sdg] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 34.204677] sd 3:0:0:1: [sdg] Write Protect is off [ 34.204919] sd 3:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.205812] sd 3:0:0:1: [sdg] Mode Sense: 77 00 10 08 [ 34.206036] sdf: [ 34.206124] sd 3:0:0:1: [sdg] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 34.206312] unknown partition table [ 34.208913] sdg: [ 34.209123] sd 3:0:0:0: [sdf] Attached SCSI disk [ 34.209907] unknown partition table [ 34.211610] sd 3:0:0:1: [sdg] Attached SCSI disk [ 49.730278] device-mapper: uevent: version 1.0.3 [ 49.730888] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 49.739269] lpfc 0000:0c:01.0: 3:1303 Link Up Event x1 received Data: x1 x1 x8 x2 x0 x0 0 [ 49.741758] lpfc 0000:0c:01.0: 3:(0):0100 FLOGI failure Status:x3/x18 TMO:x0 [ 49.782209] scsi 4:0:0:0: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 49.785964] scsi 4:0:0:1: Direct-Access IBM 1742-900 0520 PQ: 0 ANSI: 3 [ 49.786837] sd 4:0:0:0: [sdh] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 49.787703] sd 4:0:0:0: [sdh] Write Protect is off [ 49.788121] sd 4:0:0:0: [sdh] Mode Sense: 77 00 10 08 [ 49.788277] sd 4:0:0:1: [sdi] 586492928 512-byte logical blocks: (300 GB/279 GiB) [ 49.788382] sd 4:0:0:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 49.789601] sdh: unknown partition table [ 49.790209] sd 4:0:0:1: [sdi] Write Protect is off [ 49.790611] sd 4:0:0:1: [sdi] Mode Sense: 77 00 10 08 [ 49.790846] sd 4:0:0:1: [sdi] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 49.792168] sd 4:0:0:0: [sdh] Attached SCSI disk [ 49.793021] sdi: unknown partition table [ 49.794813] sd 4:0:0:1: [sdi] Attached SCSI disk [ 52.856436] EXT3-fs: barriers not enabled [ 52.860531] kjournald starting. Commit interval 5 seconds [ 52.860577] EXT3-fs (dm-0): mounted filesystem with writeback data mode [ 53.081676] SELinux: Disabled at runtime. [ 53.082129] SELinux: Unregistering netfilter hooks [ 53.095904] type=1404 audit(1279498064.094:2): selinux=0 auid=4294967295 ses=4294967295 [ 57.182231] input: PC Speaker as /class/input/input2 [ 57.402618] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x440, revision 0 [ 57.627943] tg3.c:v3.110 (April 9, 2010) [ 57.627973] tg3 0000:01:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 57.658785] tg3 0000:01:01.0: eth0: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:14:5e:1c:a3:20 [ 57.658790] tg3 0000:01:01.0: eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 57.658795] tg3 0000:01:01.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0] [ 57.658799] tg3 0000:01:01.0: eth0: dma_rwctrl[769f0000] dma_mask[64-bit] [ 57.658826] tg3 0000:01:01.1: PCI INT B -> GSI 28 (level, low) -> IRQ 28 [ 57.686530] tg3 0000:01:01.1: eth1: Tigon3 [partno(BCM95704A6) rev 2100] (PCIX:66MHz:64-bit) MAC address 00:14:5e:1c:a3:21 [ 57.686535] tg3 0000:01:01.1: eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 57.686540] tg3 0000:01:01.1: eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 57.686543] tg3 0000:01:01.1: eth1: dma_rwctrl[769f0000] dma_mask[64-bit] [ 57.758847] QLogic Fibre Channel HBA Driver: 8.03.02-k2 [ 57.758918] qla2xxx 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 57.759055] qla2xxx 0000:04:01.0: Found an ISP2300, irq 19, iobase 0xffffc900010de000 [ 57.759462] qla2xxx 0000:04:01.0: Configuring PCI space... [ 57.759601] qla2xxx 0000:04:01.0: Configure NVRAM parameters... [ 57.858140] qla2xxx 0000:04:01.0: Verifying loaded RISC code... [ 58.995268] Hotplug Mem Device [ 59.547250] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 59.547300] rtc0: alarms up to one year, 242 bytes nvram [ 60.525149] input: Power Button as /class/input/input3 [ 60.525231] ACPI: Power Button [PWRF] [ 61.553379] usbcore: registered new interface driver usbserial [ 61.553402] USB Serial support registered for generic [ 61.553442] usbcore: registered new interface driver usbserial_generic [ 61.553445] usbserial: USB Serial Driver core [ 61.629139] ide-cd driver 5.00 [ 61.631335] ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache [ 61.631350] Uniform CD-ROM driver Revision: 3.20 [ 61.652043] USB Serial support registered for GSM modem (1-port) [ 61.652116] usbcore: registered new interface driver option [ 61.652118] option: v0.7.2:USB Driver for GSM modems [ 65.811602] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 65.811661] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 65.811709] sd 1:0:0:1: Attached scsi generic sg2 type 0 [ 65.811759] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 65.811806] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 65.811859] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 65.811917] sd 3:0:0:1: Attached scsi generic sg6 type 0 [ 65.811965] sd 4:0:0:0: Attached scsi generic sg7 type 0 [ 65.812011] sd 4:0:0:1: Attached scsi generic sg8 type 0 [ 67.891296] qla2xxx 0000:04:01.0: Firmware image unavailable. [ 67.891302] qla2xxx 0000:04:01.0: Firmware images can be retrieved from: ftp://ftp.qlogic.com/outgoing/linux/firmware/. [ 67.891310] qla2xxx 0000:04:01.0: Failed to initialize adapter [ 67.891418] qla2xxx 0000:04:01.0: PCI INT A disabled [ 74.623995] floppy0: no floppy controllers found [ 74.730583] lp: driver loaded but no devices found [ 75.187244] md: Autodetecting RAID arrays. [ 75.187249] md: Scanned 0 and added 0 devices. [ 75.187252] md: autorun ... [ 75.187254] md: ... autorun DONE. [ 75.280940] device-mapper: multipath: version 1.1.1 loaded [ 77.361509] EXT3-fs (dm-0): using internal journal [ 77.437881] EXT3-fs: barriers not enabled [ 77.438097] kjournald starting. Commit interval 5 seconds [ 77.439721] EXT3-fs (sda1): using internal journal [ 77.439729] EXT3-fs (sda1): mounted filesystem with writeback data mode [ 77.835882] Adding 2031612k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031612k